Browse by Category
  
Search  
Aptela Knowledge Base » Phones and Adapters » Linksys Phones » Linksys WIP330 WiFi phone

Linksys WIP330 WiFi phone

Aptela does not provide free service or support for Linksys phones.

Provided below are settings for the WIP330 which should help with configuration.

WIP330 Settings

01) Proxy IP = voip.aptela.com
02) Proxy Port = 5060
03) Register Proxy IP = voip.aptela.com
04) Register Proxy IP Port = 5060
05) Outbound IP = voip.aptela.com
06) Outbound IP Port = 5060
07) Expire Time = 60
08) Display Name= Name
09) Phone Number = username.groupname
10) User Name = username.groupname
11) Password = 16 digit random number.
To find your SIP password, log into www.aptela.com/my-account/ as the account operator. Click on Settings and then About to get the SIP password
12) Payload Type = G.711u, G.729
13) Packet Time = Small
14) DTMF Relay = Enabled
15) UDP Port = 5060
16) RTP Port = 10000
17) Session Timer = 300
18) SIP Format = Normal


Please note that we do not have a WIP phone in house so while these settings have been verified as working with help from clients, we can provide very little support if they do not. The most common settings to check if the phone does not register are the user name and password settings.

Email    Print


How helpful was this article to you?

Related Articles

article Linksys Phone Configuration Documents

Aptela does not provide service or support for Linksys phones.  Attached are documents to assist with configuring your Linksys device. Prior to...
(No rating)  2006.10.11    Views: 13354   

article How do I access the Linksys adapter's configuration menu from my analog phone?

Code Description ****Enter the star key four times to hear the Interactive Voice Response Menu. Do not press any other keys until you hear the...
  2006.12.05    Views: 11141   

article Setting up the Linksys SPA2102 ATA for auto-configuration

To set up the Linksys SPA2102 ATA for a user or a fax machine, follow the below instructions. Also, visit our YouTube video tutorial which will...
  2009.02.27    Views: 10463   

article Linksys Router Configuration

Default Settings Our test lab results show that the default settings are sufficient in order to allow two-way communication.  The phones will...
  2006.08.29    Views: 13339   

article How do I configure the Linksys adapter for voicemail?

Open a web browser and enter your ATA's IP address. This will take you to a webpage to set up experience. To get the IP Address, first connect a...
(No rating)  2007.02.01    Views: 6076