Browse by Category
  
Search  
Aptela Knowledge Base » Phones and Adapters » Linksys ATAs » How do I configure the Linksys adapter for voicemail?

How do I configure the Linksys adapter for voicemail?

Open a web browser and enter your ATA's IP address. This will take you to a webpage to set up experience.

    • To get the IP Address, first connect a phone to the ATA. Using the phone, enter the star button four times (****). Then enter 110#. The IP address is announced to you via the handset. Note: you don't have to have a dial tone to access the ATA's menu.

Click "Admin login"
Click "Advanced View"

Change the following settings:

Select the tab "Line1" or "Line2"
Look for "Dial Plan" and change it to the following:

(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.|[2-9]xx[2-9]xxxxxxS0|<*123:voicemail@aptela.com>)

Select the tab "Line1" or "Line2"
Go to "Proxy and Registration"
Change "Voice Mail Server" to the following:

sip:username.groupname@aptela.com

Click the Save/Submit button at the bottom.

*123 on the phone should now bring up your voicemail.

Email    Print


How helpful was this article to you?

Related Articles

article Linksys Phone Configuration Documents

Aptela does not provide service or support for Linksys phones.  Attached are documents to assist with configuring your Linksys device. Prior to...
(No rating)  2006.10.11    Views: 9793   

article How do I access the Linksys adapter's configuration menu from my analog phone?

Code Description ****Enter the star key four times to hear the Interactive Voice Response Menu. Do not press any other keys until you hear the...
(No rating)  2006.12.05    Views: 6580   

article Setting up the Linksys SPA2102 ATA for auto-configuration

To set up the Linksys SPA2102 ATA for a user or a fax machine, follow the below instructions. Also, visit our YouTube video tutorial which will...
  2009.02.27    Views: 5590   

article Linksys Router Configuration

Default Settings Our test lab results show that the default settings are sufficient in order to allow two-way communication.  The phones will...
  2006.08.29    Views: 9978   

article How do I configure my Polycom phone with a static IP address

Aptela recommends that you use DHCP for the phone's network configuration. That aside, sometimes it is necessary to use static addressing on...
  2006.09.18    Views: 6947