My Polycom phone says 'URL Call is Disabled'
|
When the phone says 'URL Call Disabled', this means the phone is not registering with our servers and you will not be able to make or receive calls. Verify that you do have a working Internet connection, and reboot your phone. You may also need to try rebooting your router. If you have tried these things and your problems continue, please contact our support department. |
Email
PrintRelated Articles
Polycom Configuration Guide (Aptela Purchased)
Instructions to set up Aptela purchased Polycom phones are detailed in the guide to the right (see attachments box).Also, visit our YouTube...
2009.04.16
Views: 13817
Troubleshooting Polycom Phone Configuration
Most phone installation or registration issues arise when the phone's MAC Address is
not assigned to an extension or when the phone settings...
2006.09.12
Views: 5185
Transferring via the Polycom or Aastra 6757i CT Phone
Transferring a call using the Polycom or Aastra transfer button works on inbound calls only. Follow the below steps to transfer an inbound call...
2006.09.06
Views: 12191
Resetting the Polycom phone password if you forget it
Press 4, 6, 8, and * at the same time and the phone will ask for the ADMIN password (certain Polycom models use 1, 3, 5, 7 instead). If you've...
2006.12.21
Views: 8381
Polycom phone cannot obtain boot parameters
Issue: My Polycom IP Phone is in a constant state of reboot. It keeps showing the message, "Failed to get boot parameters via DHCP. xxx...
(No rating)
2006.09.24
Views: 11128